-Industrial washing machines for washing metal parts in a few minutes, with upper loading and unloading.

-Washing is carried out by spraying at 3 bar.

-A rotating platform fitted with a basket ensures rotation of the parts, preventing dead angles and permitting the washing of all faces. Automatic spray cycle. Vapor suction.

-The machines with rotating baskets can be supplied in two versions:

-Heated for use with alkaline products.
-Non-heated for use with cold products.

-Machines with a mobile nozzle chamber ( increases the wash area ) and static parts which spray the hot alkaline solution over the parts, thus increasing cleaning action due to the mechanical spray effect. Suitable for general washing of parts in low production batches:

-Front parts loading and unloading.
-Automatic cycle.

-Special machines for bulk cleaning and degreasing of small parts nuts and bolts. Continuous oarts movement during the wash cycle. With rotating drum which permits bulk loading and unloading on the same side.

-Intermittent automatic cycle.

-Machine which allow varous treatments to be carried out in the same chamber without any need to handle the parts.

-Automatic door opening.

-Parts rotation on rotating platform, avoiding dead angles and permitting the washing of all faces, with it being impossible to mix the baths.

-Automatic programming of up to a total of four stages: wash-rinse-passivation or phosphating.